DN15-40rotary – Vane Dry-Dial Plastic Water Meter

• Install: Horizontal
• Medium Temperature: Cold Water
• Level Measurement: B
• Model NO.: LXSG-20
• Counter Instructions: Digital and Analogue
• Nominal Diameter: Big Diameter
• Application: Civil, Industrial
• Principle: Speed of Water Meter
• Medium Pressure: General Water Meter
• Work Environment: Dry Water Meter
• Stucture: Traditional
• Transport Package: Wooden Box Package or Carton
• Specification: DN40-DN300
• Trademark: Customizable mark
• Origin: Ningbo China
• HS Code: 9028201000
• Production Capacity: 500000/One Month

Product Description

LXSG-15M~20M
Multi-jet, vane wheel, dry-dial water meter
( with eight number wheels)




Application:
--Measuring the total volume of cold portable water passing through the pipeline.

Feature:
--Multi-jet, dry-dial, easy for maintenance;
--Magnetic drive reliable characteristic, long working life;
--Vacuum sealed register ensures the dial keep free from fog and frost, Keep the reading clear in a long term service;
-- Technical data conform to international standard ISO4064 Class B.


Working condition:
Water temperature: 0.1ºC~50ºC for cold water meter .
   0.1ºC~90ºC for hot water meter.
 Water pressure   : ≤1.0-1.6Mpa.
Maximum permissible error:
(1) in the lower zone from q_min inclusive up to but excluding q_t is ±5%.
(2) in the upper zone from q_t inclusive up to and including q_s is ±2%;
  Hot water meter ±3%.

MAIN TECHNICAL SPECIFICATIONS

Type	Size   (mm)	Class	qs Overload                Flow	qp Permanent          Flow	qt Transitional Flow	qmin Minimum Flow	Minimum Reading	Maximum Reading
			m^3/h		L/h		m^3
LXSG-15M	15	B	3	1.5	120	30	0.00005	99,99,999
LXSG-20M	20	B	5	2.5	200	50	0.00005	,99,99,999

 

DIMENSIONS

Type	Size	L           Length	B        Width	H             Height	d Connecting Thread
	mm
LXSG-15M	15	165	89	98	G3/4B
LXSG-20M	20	190	89	98	G1B

 

LXSG-15M-20M  MULTI-JET, VANE WHEEL, DRY-DIAL WATER METER
Code	Description	Material	QTY
1	Lid	HDPE	1
2	Hinge Pin	Stainless	1
3	Cap	Brass	1
4	Sliding Gasket	PP	1
5	Glass Fixing Ring	ABS	1
6	Glass	Tempered Glass	1
7	O-ring	Silicon Rubber	1
8	Register Fixing Ring	ABS	1
9	Register	Assembly	1
10	Central Gear	Component	1
11	Magnetic Shield Ring	Iron	1
12	Gearing box	ABS Plastic	1
13	Tightening Gasket	Rubber	1
14	Turbine Component	Component	1
15	Measuring Chamber	HIPS	1
16	Bottom Strainer	LDPE	1
17	Body	Brass	1
18	Adjusting Screw	POM	1
19	Adjusting Gasket	Nylon	1
20	Adjusting Plug	Brass	1
21	Inlet Strainer	PP	1
22	Coupling Gasket	Rubber	2
23	Coupling Tail Piece	Brass	2
24	Coupling Nut	Brass	2

Ways to solve the metering deviation of the water meter:

(1) Renovate the household pipe network and strive to improve the water quality of the pipe network;

(2) Strictly check the water meter in strict accordance with the provisions of the national inspection regulations of the water meter, and make the rotation of the expiration;

(3) When the water meter is selected, the rated flow of the water meter should be as close as possible to the actual water flow rate;

(4) During the installation of the water meter, it must be installed in strict accordance with the technical requirements of the water meter. First, there should be a certain straight pipe section before and after the water meter. The length of the straight pipe section before the watch should be no less than 10 times the diameter of the water meter. The surface should be no less than 5 times the diameter of the water meter. Second, the water gauge should be horizontal; the third is the water meter. It is good to install the filter to effectively prevent the water from entering the water meter. Fourth, the valve should be fully opened before the water meter to make the water pressure stable, so as to ensure accurate metering.